LED Video ProcessorsLED video processorSignal processing hardware for routing, scaling and mapping display sources.Pixel pitchNot applicable
EnvironmentAccessory
Spare LED Modules
Spare LED module set.
A spare LED module set for practical service response, stored and labeled around the cabinet format and pixel pitch of the installed wall.
Reference highlights
Typical values; confirmed in your quotation.
Pixel pitchNot applicable
IncludedModules and service labels
CompatibilityConfirmed per wall
StorageProtected, dry storage
Technical reference
Full specification.
Reference specifications. Values shown are typical for this class of display and are confirmed in your quotation.
| Pixel pitch | Not applicable |
|---|---|
| Cabinet dimensions | Module size follows the supported cabinet; commonly 0.82 ft × 0.41 ft (0.25 m × 0.125 m) |
| Cabinet resolution | Matches supported wall module |
| Display resolution (per cabinet) | Not applicable |
| Brightness | Matches supported wall class |
| Refresh rate | Matches supported wall receiving system |
| Viewing angle | Matches supported wall class |
| Contrast ratio | Matches supported wall class |
| Power consumption (average / maximum) | Module draw follows supported cabinet |
| Cabinet weight | Varies by module format; confirmed per wall |
| Cabinet material | LED module housing and service connector set |
| IP rating | Matches supported wall environment |
| Indoor / outdoor classification | Accessory |
| Servicing access (front / rear) | Front service replacement format |
| Control system compatibility | Compatible only with the confirmed wall receiving system |
Available configurations
Build the wall around the room.
- Spare set for a 6 × 3 cabinet wall — 10 ft × 5 ft (3 m × 1.5 m)
- Spare set for a 12 × 6 rental wall — 20 ft × 10 ft (6 m × 3 m)
Common builds are a starting point; the exact cabinet count, assembled size and support plan are confirmed in the configuration stage.
Open the configuratorInstallation notes
Plan the system around access.
- Spare modules are matched to the wall before they are added to the service package.
- A dry, protected storage location is needed near the responsible service team.
- Labels connect the spare set to the cabinet map and the display’s receiving system.
- Commissioning includes a fit check, service orientation and storage handover.
Related products
Other equipment to consider.
LED Video ProcessorsLED video processorSignal processing hardware for routing, scaling and mapping display sources.
Mounting StructuresModular mounting structureAdjustable support hardware that keeps an LED wall aligned and serviceable.Pixel pitchNot applicable
EnvironmentAccessory
Flight CasesRental flight caseProtective transport storage for repeatable rental-wall load-in and strike.Pixel pitchNot applicable
EnvironmentAccessory
Product questions
Questions to settle early.
Can any LED module be used as a spare?
No. The module must match the wall’s pixel pitch, format, receiving system and environment; compatibility is confirmed before supply.
What is included in a spare set?
The set can include matched modules, labels and the practical service pieces needed for the selected wall configuration.
How should spares be stored?
Keep them labeled, dry, protected from impact and easy for the responsible team to locate during service.
Request a quote
Discuss spare led module set.
Tell us about the room, audience and content. The product name will be carried into the quote form so the conversation starts in the right place.